Difference between revisions of "Water Pump"
| (6 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | {{ | + | __NOTOC__ |
| + | {{stub}} | ||
| − | |||
| − | + | {{note|text='''There are two pumps within the cooling system:'''<br/> | |
| + | * [[Coolant_Pump|The electrical coolant pump]]<br> | ||
| + | * The mechanical coolant pump<br/> | ||
}} | }} | ||
| + | The water pump is driven from the [[Belts|cam/timing belt]], and should be replaced on the same schedule since it is only accessible once the cam belt is removed. | ||
| − | + | Cooling System : Water Pump | |
| − | + | ||
| − | [[ | + | BECK/ARNLEY Part # 1312115 |
| + | |||
| + | Airtex Part # AW9220 | ||
| + | |||
| + | AC Delco Part # 252227 | ||
| + | |||
| + | Gates Part # 41053 | ||
| + | |||
| + | <gallery> | ||
| + | Image:Pump 1.jpg | ||
| + | Image:Pump 2.jpg | ||
| + | Image:Pump 3.jpg | ||
| + | </gallery> | ||
| + | Note that the above pictures of the later (incorrect) Beck/Arnley 131-2114 (equivalent to Airtex AW9221) for squared tooth belts but otherwise identical. | ||
| + | |||
| + | '''Potential issue''' | ||
| + | |||
| + | There have been issues fitting some aftermarket water pumps (definitely Beck/Arnley and probably others). Part of the casting does not allow the five mounting holes to line up. The best way to confirm is to insert one bolt in the top right hand side and confirm that there is sufficient movement anticlockwise to allow the four other holes to line up. It is quite obvious if there is an issue as the casting above and to the left of the lower hole fouls. The easiest solution is to remove some of the casting with a round file or Dremel. | ||
| + | |||
| + | [[File:Water_pump_Beck-Arnley_131-2114_compared_to_OEM.jpg|800px]] | ||
| + | |||
| + | The above shows the Beck/Arnley casting compared to an OEM water pump. | ||
| + | |||
| + | [[File:Water_pump_fettling_1.jpg]] [[File:Water_pump_fettling_2.jpg]] | ||
| + | |||
| + | The above shows the issue in detail and a fettled water pump. | ||
| + | |||
| + | ===See Also=== | ||
| + | * [[Coolant_Pump|Coolant Pump]] | ||
| + | |||
| + | == External Links == | ||
| + | * [http://lotuselancentral.com/forum/viewtopic.php?p=113427 LEC Forum - Electric Water Pump] | ||
| + | |||
| + | [[Category: ReplacementParts]] | ||
| + | [[Category:Components]] | ||
Latest revision as of 22:48, 12 March 2020
|
This article is incomplete and needs expansion. You can help WikiLEC by expanding it. |
|
|
There are two pumps within the cooling system:
|
The water pump is driven from the cam/timing belt, and should be replaced on the same schedule since it is only accessible once the cam belt is removed.
Cooling System : Water Pump
BECK/ARNLEY Part # 1312115
Airtex Part # AW9220
AC Delco Part # 252227
Gates Part # 41053
Note that the above pictures of the later (incorrect) Beck/Arnley 131-2114 (equivalent to Airtex AW9221) for squared tooth belts but otherwise identical.
Potential issue
There have been issues fitting some aftermarket water pumps (definitely Beck/Arnley and probably others). Part of the casting does not allow the five mounting holes to line up. The best way to confirm is to insert one bolt in the top right hand side and confirm that there is sufficient movement anticlockwise to allow the four other holes to line up. It is quite obvious if there is an issue as the casting above and to the left of the lower hole fouls. The easiest solution is to remove some of the casting with a round file or Dremel.
The above shows the Beck/Arnley casting compared to an OEM water pump.
The above shows the issue in detail and a fettled water pump.
